How to install garage door springs and cables?

0
garage door repair company

Garage door springs keep the door balanced and in control while it opens and closes. Your opener wouldn’t be able to lift the door without these. Garage door problems are common, and few people take care of maintenance. Due to a lack of knowledge in the field, people let it rot for longer. Calling a professional at the Garage Door Company in Sacramento can save you from the hazards of a DIY task.

In this article, you will know how to install extension garage door springs and cables.

  1. Remove all spring tension by opening the garage door and clamping it. Disconnect the garage door opener once all is set. Locate the position of the pulley with tape and reinstall it in the same spot.

  2. Unfasten the track bracket and the spring pulley from the spring.

  3. To keep the spring positioned, we insert a safety cable.

  4. Discard the old spring and disengage the safety cable and the bracket.

  5. Find out which springs need replacement. Extension springs have a color-coded design that indicates how much weight they can raise.

  6. Bring the new spring and replace the old one.

  7. Join the replacement spring and the track bracket by threading the safety cable in.

  8. Reattach the safety cable and pulley so that the pulley’s wire stays away from the safety cable. To ensure that the pulley is properly positioned, use a piece of tape that you affixed before removing it.

  9. Connect the garage door opener after removing the clamps.

  10. To ensure that the replacement is done successfully, test the garage door. If the door does not work properly, check the location of the pulley and extension spring components and make any required adjustments.

Tools you need:

Check out the following tools for garage door repair in Sacramento CA.

  • Set of professional winding bars.

  • Hammer.

  • Leather or non-slip gloves.

  • Quality Clamps

  • Cordless drill

  • Adjustable wrenches; look for different sizes, tracks, and diameters.

  • Locking pliers with pressure capacity.

  • Rags.

  • Sinker bars.

  • Safety glasses and boots.

  • Socket/ratchet wrench set.

  • Set of wrenches, screwdrivers, and Allen keys, among others.

Conclusion

Now you have a fair idea about installing garage door springs, make sure you use quality material. Moreover, you have to practice caution because you are not an expert. Get professional services for garage spring broken in Sacramento.


Read More:  How to clean your Garage?

LEAVE A REPLY

Please enter your comment!
Please enter your name here