Will Steam Mop Ruin Hardwood Floor?

Will steam mop ruin hardwood floor

If you are one of those people that are looking for a way to clean your hardwood floors but are worried about the possibility of ruining them, you are not alone.

With the recent popularity surge of steam cleaning, there are now more people worried about damaging their floors.

Whether you are worried about getting an old-fashioned mop, or something fancy like a steam mop, will steam mop ruin the hardwood floor?

so I think no, it is not valuable to use. Nowadays, you can choose from many different types of cleaning tools.

Some of these are traditional methods that have been used for ages, while others are newly developed tools that are more efficient. , this article will cover ways to protect your hardwood floors.

Steam mop ruin hardwood floor

When you clean your wood floors, you must go over the warranty agreement for the floor to make sure that steam cleaning is allowed before you try it out.

You don’t want your reclaimed wood flooring to be damaged in any way.

It’s a good idea too to do a test run on an inconspicuous area of your flooring just in case anything shows up that might cause potential damage.

Why we don’t use a steam mop on the hardwood floor

A high-quality hardwood floor drying system is a must in a situation where you have water damage to restore the floors to their previous glory.

One must be extra cautious when using a drying system because there can be problems such as overheating and water escaping from the floor.

Many manufactures may not cover will steam mop ruin hardwood floor? This is because they are unfamiliar with dry steam vapor.

Steam cleaning is different from cleaning with a steam vapor machine; steam vapor is very dry, so not much moisture is left on the flooring.

Steam heat can raise wood grain if the wood is bare or only a wax finish is used, but most sealed hardwood is great with dry steam vapor.

Water is the foe of hardwood floor

When water soaks into the wood, there is irreversible damage to your flooring. So be sure to always take steps to avoid getting water on your floor and try not to leave the place where you water excess water – this will help prevent further damage and eliminate the risk of having any long term long-term negative effects.

Of course, if you do happen to drop a glass and it’s fresh from the dishwasher, run to grab some paper towels instead of taking a vacuum as it will really suck up those soaked paper towels and may even pull out some of the etching that was done as part of the sealant making it look as if that area has been bashed in or dented.

Working of steam mop

Though many steam mops will increase their temperature to 200 degrees or higher, they are generally not powerful enough to properly sanitize the floor.

If the floor seems unusually warm after using one of these devices, it is because there is still residual water left on the floor itself.

We don’t recommend steam mops for wood floors because they are too weak to remove any sort of built-up grime.

Working of steam mop

Working of steam mop in hardwood floor

There are different steps of working of steam mop in the hardwood floor.

Heat your system

It’s best if you’ve already been using your steam cleaner for a little while before starting on your floors to make sure the machine is working at its peak and will consequently generate the hottest, driest steam.

If you have a hardwood floor, before getting started, test out your machine to see how well it will remove marks from it.

Or maybe start with wiping down your floor, since they won’t be too dirty just yet.

Heat your system

Set up your volume

For best results with any steamer, make sure it’s always on the lowest setting. If your steamer is equipped with a volume control ****, turn it to about 1 or 2 on a scale of one to ten. This will ensure that your steam doesn’t get too hot and causes unwanted wrinkles.

Analyze your accessories

Accessories are key, especially when caring for hardwood floors. I recommend using a large rectangular floor brush that has been connected to multiple extensions. To ensure your results are both evenly distributed and free of scorch marks, I suggest using a brush pad to fill in the gaps between the hardwood bristles.

This also assists in providing more moisture across your floors while helping to contain any extra dampness while gushing through the head of the steam mop

Cover it up

It’s important to tuck your steam brush into the genuine microfiber terry towel to soak up whatever moisture that may be surrounding the brush. Using micro-fiber instead of ordinary towels will result in absorption of moisture better than any other ordinary fabric or towel would.

You don’t want water building up on brushes because it could cause paint stripping, smoke during use, and even burning yourself if steam gets stuck around the hair. It is also good to make sure that there are no holes in the microfiber allowing steamed air to leak out.

If that happens you will lose your pressure for surface drying which may lead you to common problems like leaving water spots behind after use. Any cloth can absorb some amount of moisture but sooner or later they are going to become damp.

Find the spot and remove it

Keeping your hardwood floor clean is important, but it’s also important to clean the floor in a way that won’t damage the wood.

To do this make sure you always use cleaning tools with hot steam, not too hot though. Use the tool only when the surface of the wood is clean of debris that could otherwise scratch or mark up your floor.

Move your tool in slow back and forth motions across the floor; never stop moving until you’re walking over another area of the room.

Also, make sure to move at a pace slower than you would vacuum since vacuuming can damage your hardwood by wearing away on its corners or leaving small objects between wooden planks which could otherwise crack your flooring down the road.

Why steam mop does not save for hardwood floors?

That’s true whether you have hardwood or engineered wood floors, and for bamboo too. When it comes to all-purpose steam mops made by brands like Shark and Bissell, the official answer is generally no.

However, there are still ways to clean your floor without using a steam jet if that’s what you’re worried about.

It ultimately comes down to what you want out of your cleaning method and how much time you can put in every day to keep the floor clean throughout the week.

FAQ related to will steam mop ruin a hardwood floor

Is the shark steam mop safe for hardwood floors?

You shouldn’t attempt to use an unoccupied Shark ® Steam Mop on any hardwood floors unless the entire area is regularly maintained with a suitable sealant. While they might seem like an innocuous addition when they’re applied regularly, when not regularly maintained wood floors can become more prone to moisture damage in the long run.

How do you know if your wood floors are sealed?

To determine whether or not your hardwood floors have been sealed, find an area of the floor that’s low traffic, dab a drop of water on the surface using a soft cloth, and see if it soaks in or beads up. If there’s no beading, your hardwood floors are sealed. Sealed floors can avoid the potential damage that can be done by spills and pet urine while also being easy to clean.

What floors can you use a steam mop on?

Steam cleaners are generally safe to use on most types of flooring. Steam cleaners are safe to use on any type of vinyl or linoleum floor, on ceramic or porcelain tile, and some forms of hardwood and laminate flooring.


Steam mopping is an absolute must-have in the days of hardwood flooring. They are an easy way to clean up all of the messes that your family leaves behind but will steam mop ruin the hardwood floor?

Steam mops are an inexpensive and effective way to clean your hardwood floors. However, they are not the best option for all hardwood floor surfaces.

When considering your hardwood floor, first determine whether it is real hardwood or laminate. Steam mops are only recommended for real hardwood floors, as laminate flooring contains a film that will become damaged by steam.

If your hardwood floor is real, then you will want to know if it is sealed. Sealed hardwood flooring is more durable, but it is also more expensive to maintain.

If your hardwood floor is not sealed, then it will require more maintenance than sealed floors. We hope that this article on steam mops on hardwood floors helped you learn about the best practices for cleaning your hardwood floors.

If you want to read and explore more articles so you can visit our website.


Please enter your comment!
Please enter your name here