Your range extender will return to its factory default settings by using the comfast repeater reset procedure. The factory default settings refer to the original configurations and settings that the extender was sold with. All settings, wireless logs, and connections are deleted from the Comfast WiFi range extender when you reset it. The password for your Comfast wifi range extender will also be reset. Remember that your device may need to be reconfigured after it is reset.

Comfast extender reset

The Comfast range extenders rank among the top on the market. Comfast extenders provide blazing fast internet and keep network disturbances at bay. Your extender’s good qualities do not mean that there will be no errors or other problems. There may be minor issues with your Comfast WiFi extender over its lifetime, but they are easy to fix. Your wifi range extender will not experience any hardware malfunctions or defects.

This post will show you how to easily reset your password for the Comfast wifi extender.

Requirements to reset the repeater?

This section will explain what you need to do to reset your Comfast extender.

1. You should power on the Comfast WiFi extender
2. There is no need to connect range extenders to other devices.
3. An adequate power supply should be available for the Comfast range extender.
4. The range extender shouldn’t be defective. This can be confirmed by connecting to your wifi extender to check the behavior.

Reset your password for the Comfast wifi extender

The final section of this article will discuss the Comfast extender reset procedure. To avoid any confusion, ensure you carefully follow the steps.

1. Firstly, locate the reset or push button on your Comfast repeater. It is likely to be on the backside of the range extender.
2. The Comfast range extender’s frame usually houses the reset button. You will need a toothpick and a paperclip.
3. With the help of a paperclip press the reset/push key on your Comfast wifi extender.
4. Next, do not release the reset button. Make sure you keep the reset button on your wifi extender pressed for at least 10 seconds.
5. Now, you will now see your LED light flashing.
6. Finally, push the button and wait for a while.

During the reset, please make sure that the device is not turned off. Once it has restored the original settings, the Comfast wifi extender will automatically restart. After restoring the original settings, make sure to not turn off your device.

 reconfigure the Comfast extender

you have restored the factory default settings to your Comfast repeater, it is time to reconfigure it. Here are some steps to help you reconfigure your device.

1. Firstly, connect to your Comfast extender’s wifi network.
2. Secondly, connect to the wireless network, and enter the default password for wifi.
3. Next, open an internet browser and type the gateway IP address 192.168.10.1.
4. Then, connect the range extender to the main router’s wireless network. Locate the SSID.
5. To establish the connection, you will need to enter the Wifi key.
6. Finalize your settings to set up your device.

After you have completed the Comfast extender configuration process, you can unplug your device and place it where you no longer experience weak signals. After the setup is complete, you can place the device wherever you like. The device should be placed at a minimum distance from the router. The extender shouldn’t be too close to the router.

Conclusion

This was how to reset the Comfast wifi extender password by returning it to its factory default settings. We hope that you enjoyed this post. It helped you reset your range extender’s password. We are happy to assist you with any questions regarding the Comfast extender.

website: https://www.articlestheme.com/