How To Install Trigger Kit In Marlin 1894

0
rifle trigger kit

A Marlin 1894 rifle is a gun that can be used for hunting or target shooting. Though this gun is considered to be quite reliable, it is still necessary to perform maintenance on your Marlin 1894 occasionally. One such task is to install a trigger kit.

The installation process of a trigger kit is relatively simple and can be done by most gun owners. To give you a brief on how to install a trigger kit on your Marlin 1894 – you will first have to remove the old sear and hammer which are essential parts in making the gunfire. 

To know in full detail about how to install a trigger kit on your Marlin 1894 rifle gun, read ahead! 

What’s special about the Marlin 1894 rifle?   

The Marlin 1894 rifle is a lever-action gun that has a tubular magazine. This rifle was designed by John Marlin in 1881 and was first produced in 1895. The Marlin 336 Gold Trigger is one of the most popular versions of this rifle and it has a gold-plated trigger. Another great example is a Marlin 30 30 gold trigger.      

What kind of trigger kit do I need for my Marlin 1894?   

There are a few different types of trigger kits that will work with the Marlin 1894. Some of them are the Timney Trigger, the Rifle Basix Trigger, and the JP Enterprises Trigger.  

The benefits of installing a trigger kit on your rifle are:

– A Marlin trigger kit can help improve the accuracy of your shots.

– It can make your rifle more responsive and easier to fire.

– It can provide a smoother trigger pull, which makes it easier to fire your rifle accurately.

To install a trigger kit in a Marlin 1894, you will need:

– screwdriver set with interchangeable Phillips and flathead tips

– hammer

– vice or vise block fixture

– paper towels or rags

How do I install a Marlin 1894 trigger kit? 

  • To begin, you should place the rifle on a table and look into the action.
  • Remove all three screws from the Marlin 1894 hammer, leaving only the screw that holds in the rebound slide.
  • Push out the rebound slide and remove it along with its spring.
  • Using a drift punch to push down on the pin while pulling out the lever pivot will also help loosen this part so you can pull it out completely.
  • After removing these parts, it is time to take out the bolt stop which is connected by a screw under where you removed your hammer. 
  • Now comes perhaps one of the most important parts of installing an upgraded trigger kit for a Marlin 1894 rifle.   
  • This is the last step in installing a trigger kit onto your Marlin 1894. You have to put the bolt stop back into place and then insert the bolt release arm from below into its slot on the top of the receiver.
  • Then you should pivot it towards the bottom of the receiver so that you can reinsert its spring and pin.
  • Afterward, you should slide down your hammer until it reaches the wide front part of your slot and insert both sides together with help from a screwdriver to keep them straight as they fall into place (there will be resistance).
  • At this point, there are only two more steps: replace your rebound
    and screw and tighten all three of your screws.       

Once the new trigger is installed, put on the bolt stop that you have just removed by sliding it into a place where you found it originally.

You should then test out your Marlin 1894 by cocking back the hammer and pressing it down with safety (there is no need to unscrew anything). A small screwdriver can also be used to make sure that everything is in place properly before shooting the gun. 

The installation process for the trigger kit on your Marlin 1894 rifle will vary depending on the type of kit you are using. Generally, you will have to remove the old sear and hammer and then install the new ones that come with the kit. There may also be some adjustments that need to be made to the firing pin and bolt stop, so it is important to read and follow the instructions carefully in order to install the rifle trigger kit successfully.  

Once the trigger kit is installed, how do I test it?   

After installing the new sear and hammer, you will need to test the rifle to make sure that it is functioning properly. The best way to do this is to take it to a shooting range and fire a few rounds. Make sure to check the sights and adjust them if necessary. Once you are satisfied that the rifle trigger pull is accurate, and working correctly, you can go back home and enjoy your new trigger kit! 

If you are looking for a replacement trigger kit, the marlin trigger is a popular option that many people have had success with. It is important to do your research before making a purchase, however, to make sure you are getting the best quality product for your needs.

Wrapping up

Installing a trigger kit on your marlin 1894 rifle is not too difficult as long as you follow every step carefully, especially those that involve taking apart major parts of this firearm such as removing its stock plate and receiver. This will ensure that your rifle is properly lubricated and firing as it should be in terms of a perfect rifle trigger.

Additionally, when installing a trigger kit on your Marlin 1894, make sure to take off the stock plate before you remove the receiver. Your Marlin 1894’s trigger group housing should then be removed by pulling it out of its place and disassembling it. When doing this, make sure that your rifle is properly lubricated and firing correctly.   

Lastly, If you’re looking for a replacement trigger kit, the Marlin 336 Gold Trigger is a popular option that has been known to work well for many people. Be sure to do your research before making a purchase, though, as different kits can have different instructions and requirements.

Thanks for reading!

LEAVE A REPLY

Please enter your comment!
Please enter your name here