How to Fix HP Printer Error 0x61011beb

HP Printer Error 0x61011beb
HP Printer Error 0x61011beb

The 0X61011BEB HP Printer Fault is a frequent error that affects the majority of HP printers. To remove this issue from your HP Printer Error 0x61011beb, you must know how to solve it.

What Causes The 0x61011beb Printer Error

One of the following situations could be the root of this specific error:

  • Damaged communication between the printer and cartridges
  • The printer’s configuration has changed
  • faulty drivers exist between the computer and printer.

How to Resolve HP Printer Error 0x61011beb?

How to Repair Error 0x61011beb in an HP Printer You can use the troubleshooting techniques to assist you fix the issue. The HP printer issue typically happens when you try to align the ink cartridge but the alignment is off. A communication problem between the printer and the cartridge may also result in the error. Nevertheless, if the printer’s drivers or settings are incorrect, the issue can also arise. The steps below can be used to fix the HP printer problem code 0x61011beb:

  • Without turning off the printer, unplug the associated power wires from the adjacent wall outlet.
  • Wait a minute after the printer shuts down for it to enter the idle state.
  • Reconnect all of the power cords to your HP printer, then turn it on.
  • If the printer doesn’t switch on automatically, press the power button to activate it.
  • Last but not least, see if the issue still appears on your computer.

HP Printer Error Code 79

You changed from using ink to laser since it felt more contemporary, but sheesh, the mistakes keep happening. Only laser printers can experience the HP Printer Error Code 79, and it is quite simple to fix. One of two scenarios—a botched print job or an updated firmware—is almost always at blame.

We advise updating the printer’s firmware to the most recent version before restarting both the computer and the printer to prevent losing your print job. This has most frequently been an HP P2015 error code in our experience. It’s difficult to determine which print jobs in the print queue are corrupted, so if you’re still getting the issue, you’ll need to clear it.

Perform Basic Troubleshooting

If you are having this problem, try these simple troubleshooting techniques before moving on to more complicated ones. To solve this problem, just adhere to the methods listed below:

  • Turn the printer off.
  • Open the printer’s body to get the ink cartridges out of your HP printer.
  • After that, using a clean towel, wipe the printer head to get rid of any remaining dust.
  • Verify the ink levels and make sure there are no ink leaks.
  • After completing all the procedures, try starting a print test to see how the issue is progressing.


These are the solutions for fixing HP Printer General Error 0x61011bed. I hope this blog was helpful to you. By using the strategies stated above, you can quickly fix this issue. By opening a live chat, you may learn more about all of your HP printers.


Please enter your comment!
Please enter your name here