How to fix Asus router blinking red light?

0
Asus merlin factory reset

Asus has a range of routers available to satisfy every situation’s needs. The LED light in the Asus router flashes every second to point out the router is functioning correctly during a normal condition. An Asus router continuously transmits the data, and as a result, the light flashes. However, Users mainly discuss the Asus router red light blinking issue.

If you have an Asus router and are trying to find out how to fix an Asus router blinking Red light , this article will surely help you correct the problem. This blog discusses some practical solutions to ease the blinking router issue.

What does Asus Router Power Light Blinking indicate?

Asus router blinking Power light has two patterns:

  1. Slow blinking indicates the router is in Rescue mode.
  2. Rapid Flashing means WPS is processing.

This knowledge can lead you to fix our issue in the right direction.

Why is My Router Blinking Red?

  • The Modem cannot connect itself to the internet.
  • Problem with internet connection.
  • There may exist A problem from the supply end.
  • The data pack might be exhausted.
  • The network is weak with several dropped packets.
  • You are not receiving cable or DSL signals on the line.
  • Your ISP does not recognize your account.

Make sure that –

  • You try to reset the Modem.
  • The connections and cables are functioning.
  • For around 20 seconds, hold the Reset button and then press it again.
  • Remove Spectrum router power cord & wait for a minute.
  • Reconnect the modem supplies
  • Use the supplied power cord & connect spectrum to the wall outlet and turn on.
  • Still ,If your spectrum router blinking red light then try & reach out to your Internet service provider

Initial steps before troubleshooting –

  • Update router firmware.
  • You can change the router’s location to the desired position.
  • Remove the Physical obstructing particles.

Steps to troubleshoot Asus router blinking Red light issue –

  • Upgrade Your Router Firmware Manually
  • From the Asus official website, download your firmware.
  • Enter your router model.
  • Click on Support.
  • Now navigate to Driver & Utility.
  • Select BIOS & Firmware.
  • Click the Download button.
  • Save the zip file on your desktop.
  • Unzip the file.
  • Login to your ASUS router.
  • In the left-hand menu, scroll right down to Administration.
  • Select Firmware Upgrade in the horizontal menu.
  • Scroll down to the Manual firmware update
  • Click on Upload.
  • Select the unzipped firmware file.
  • The firmware upgrade process will start.
  • See the Asus router login page.
  • you should log in to your router again.
  • Type in your username and password.
  • Restart Your Network

Trying Asus merlin factory reset is proven to solve the blinking issue in most cases. Implement the following steps –

  • Turn off your network modem.
  • Unplug it from the power source.
  • Turn off your Asus router and devices.
  • Connect the modem to the power source.
  • Please turn it on.
  • Wait till the modem boots up completely. Wait for 2 minutes.
  • Now turn on the router.
  • Wait till it boots too.
  • Turn on your device.
  • Change the Settings of Adapter 
  • Connect your device with the router with the assistance of an online cable.
  • Click on the Start menu.
  • Select the Control Panel option.
  • Move to the Network and Internet section,
  • Go to the Network Connection option.
  • Search for the Change Adapter Settings tab.
  • Right-click on the LAN option.
  • Choose the Properties option.
  • Select Internet Protocol version (IPv4).
  • Scroll down.
  • Select the Properties option.
  • Change the IP address.
  • To save the changes, click on the Apply choice. 

Try to open the Asus router and check whether the facility light is still blinking or not.

  • Use the Firmware Upgrade Utility Tool to Restore the Firmware. 

You will see the Power light blinking slowly when your Asus router activates rescue mode automatically. It generally occurs in case the firmware upgrade fails.

  • Install the utility.
  • Launch the utility.
  • Select the Firmware.
  • Click on Upload.
  • Wait for 3-4 minutes.

IMPORTANT: In case of an invalid IP warning, use the following settings: –

IP address: 192.168.1.x (replace x with a number) 

Subnet mask: 255.255.255.0 

Asus router login : 192.168 1.1

  1. Disable WPS on Your Asus Router 

Disabling your WPS option in the router settings usually fixes the Asus router Power light blinking issue.

  • Login to your Asus router
  • In the left-hand navigation menu, select Wireless.
  • In the horizontal menu, select WPS.
  • Set Enable WPS to OFF.

Even After processing all the solutions mentioned above, if you can still fix the blinking issue, you probably have a Defective Router. However, we recommended connecting another router and seeing whether the problem will still be present or whether it will go away.

FAQ’s

  • What do Asus router lights mean?

Blue light blinking: Your device is charging. Blue light static: Your machine is fully charged. Red light static means Standby (Ready to charge your device). Red light blinking means Error (Unable to charge your device).

  • Why is my Asus router not Connecting to wifi?

Press the RESET button for around 5~10 seconds until the Power LED indicator of the router starts flashing, then you can stop pressing. All the LED indicators of the router are generally off during this time. It is a normal phenomenon when the router is rebooting itself.

  • Why is my router blinking red?

LOS stands for Loss Of Signal. When everything functions correctly, this light should be off. When you see the LOS Light Blinking Red on your router, it usually indicates a problem with the fiber optic connection.

  • Should I reboot my router daily?

A reboot can be scheduled anywhere from monthly to daily, Depending on the age and health of your router. It cleans out the device’s short-term memory “cache” to keep it running more smoothly.

Wrapping Up

This blog mainly deals with how to fix an Asus router blinking Red light. A brief overview of red light on Asus router has been mentioned in above points. As you can see, there are a few things you can solve technical issues on your own behalf . Go through the blog in detail and start implementing the steps one by one in a proper order to solve the issue. We hope the blog has helped you to address the problem. Happy reading! 

LEAVE A REPLY

Please enter your comment!
Please enter your name here