Tire problems and breakdowns are a trucker’s biggest nightmare. Not surprisingly, commercial truck tire repair centers nearby end up as truckers’ only hope during such situations.
Some common tire problems truckers encounter are tire punctures, uneven wear of tires, tire sidewall damage, tire pressure loss, and tire blisters on side walls.
Inspection Is The Key
In order to avoid tire problems and breakdowns, it is necessary to inspect tires and ensure that they have adequate tread depth. It is important to rotate tires regularly, to promote even wear. Getting wheels aligned and balanced at recommended intervals at a commercial truck tire repair center nearby helps check uneven tire wear.
It pays to regularly inspect tires for signs of damage, such as cuts, bulges, or punctures, and address these concerns promptly. Look for objects lodged in the tire treads, such as nails or screws. Remove them carefully or have a professional repair the tire if necessary.
Tire Blow-Outs
However, tire blow-outs are caused by a sudden and rapid loss of air pressure in a tire. Blow-outs could occur while the vehicle is in motion, and it is particularly dangerous since it could cause accidents.
One of the primary causes of tire blow-outs is under inflation, or insufficient air pressure within the tire. The other cause of tire blowouts is overloading. Overloaded tires could generate excessive heat due to increased friction, which weakens its structure and increases the risk of a blow-out.
Quite clearly, care must be taken and processes must be put in place to avoid both under inflation and overloading. Regular inspection of tires at truck tire repair centers nearby will help prevent blow-outs.
Tire Separation
Tire separation refers to a condition where the tread of a tire separates or detaches from the tire carcass, which is the underlying structure of the tire. It is a serious tire defect which could lead to sudden and potentially dangerous tire failures.
Tires are constructed with multiple layers, including the outer tread, steel belts, fabric plies, and inner liner. These layers are bonded together during the tire manufacturing process. Sometimes the bond between these layers could weaken or fail, resulting in what is known as tire separation.
Causes Of Tire Separation
The usual causes of tire separation are manufacturing defects, overloading of trucks or under inflation of tires.
Often, poor workmanship or faulty materials used during the tire manufacturing process lead to weak bonds between the tire layers. Overloading a tire with excessive weight beyond its recommended capacity or consistently operating the tire underinflated may lead to excessive heat and stress, causing tire separation.
Sometimes, incorrect tire repairs or using improper repair techniques at truck tire repair centers nearby, such as patching a tire with a damaged or weakened carcass, could contribute to tread separation.
Preventing Tire Separation
In order to prevent tire separation, it is crucial to follow proper tire maintenance practices, including regular inspections, maintaining proper tire pressure, avoiding overloading, and replacing worn-out or damaged tires.
Look for any signs of tread separation, such as bulges, visible gaps between the tread and carcass, or unusual vibrations.
Information about all the nearest truck tire shops is readily available at the Aidride website.
